Freestanding version of Model 608. Uses 5 HP engine; converts to car towable trailer
CADPlans has developed model 608, 610 and 628 sized to fit the numerous requests for a machine that suits the customer's needs. Similar to the Model 728, these machines can be built by the homeowner. NO Machining is necessary using common shop tools only. The Model 608 fits your "mini diesel" or larger Category I hitch equipped tractor; the Model 610 lets you use the Model 608 as a 3-point hitch or freestanding; the Model 628 is a freestanding version that needs no tractor, can be converted to a trailor and can move itself around the work site with the bucket.
With 5 feet of digging depth and bucket width of 5 1/2" to 15" makes these machines perfect for the electrician/plumber/landscaper., Available components insures simple constructions. . The smaller size keeps your cost down and guarantees the machine can fit where it needs to go. You are quickly productive with a low investment.
CADDigger Model 628 Technical Specifications
Width at Stabilizers, Min.
45"
Frame Length
64.5"
Tire Size
14" or 15"
Width at Stabilizers, Max.
78"
Reach
93"
Engine
5 HP
Width w/out Stabilizers
37"
Digging Depth
60"
Hydraulic Pump
2 GPM
Height to Seat
36"
Ripping Power, Bucket
2,600 lbs.
Operating Pressure
1,900 PSI
Loading Height
60"
Lateral Swing
120 degrees
Oil Tank
3 Gal
Minimum Length
77.5"
Bucket Width
5.5" to 15"
-
-
NOTICE: as CADplans cannot control the skills of the builder, or the end use of the machine, CADplans makes no warranty stated or implied and the builder must assume all liability for safe construction, safety features and operation of the CADDigger. CADplans is not responsible for typographical errors.
All CADDigger orders include the following:
Spiral bound plans, including written instructions, raw material requirements, purchased equipment specifications (generic and part numbers) and photos
Instructional DVD
Itemized lists to assist in the steel and hydraulics sourcing
