CADDigger Model 650
CADDigger Model 650
CADDigger Model 650
CADDigger Model 650
CADplans

CADDigger Model 650

Regular price $139.95 $0.00
CADDigger Model 650 TECHNICAL SPECIFICATIONS
Hydraulic Stabilizers yes Weight (approx.) 550 lbs. Pump CADTrac
Width without Stabilizers 48 in. Reach 93 in. Lateral Swing 120 degrees arc
Height to Seat 40 in. Transmission none Recommended Tractor CADTrac Only
Loading Height 60 in. Ripping Power 2600 lb. Digging Depth, Normal 60 in.
Length of Frame 27 in. Operating Pressure 2000 psi Oil Tank CAD Trac
NOTICE: The CADDigger Model 650 is designed specifically for the CADTrac. The Model 650 is like the other 600 Series CADDiggers except for a few unique features. The 650 slides into the CADTrac's keel frame tube and is held in place by 2 bolts. It is powered by the CADTrac's hydraulics. It also has hydraulic stabilizers. The addition of the Model 650 makes CADTrac a unique excavating machine. To remove the Model 650, you remove 2 bolts, pull one pin, uncouple the hydraulics and drive CADtrac away. 

As CADplans cannot control the skills of the builder, or the end use of the machine, CADplans makes no warranty stated or implied and the builder must assume all liability for safe construction, safety features and operation of theCADDigger. CADplans is not responsible for typographical errors.
     

All CADDigger orders include the following:
  • Spiral bound plans, including written instructions, raw material requirements, purchased equipment specifications (generic and part numbers) and photos
  • Instructional DVD
  • Itemized lists to assist in the steel and hydraulics sourcing

More from this collection