MODEL 1207Sized for 25-50HP Tractors. 3,500 pound Machine Weight.
CADPlans has developed model 907,1007 and 1207 loaders sized to fit almost any tractor from the "mini diesel" to 50 HP and they can be built by the homeowner or farmer. NO machining is neessary using only the common hand tools. The Model 907 fits your "mini diesel"; the1007 fits the 17HP to 25HP and the 1207 fits the 25HP to 50HP tractors. These loaders are all high profile designs giving clearance for the large front tires on 4-wheel tractors, as well as fitting 2-wheel drive tractors. Designed with heavy section materials and greasable bearings, the CADLoaders give you the strength and long life you expect.
With a simple mounting design, these loaders can quickly be attached to your tractor. You are quickly productive with a low investment.
CADLoader Model 1207 Technical Specifications
Loading Height
108"
Hydraulic Flow Recommended
10 GPM
Hydraulic Pump
Tractor
Lifting Power
3,000 lbs.
Hydraulic Pressure
2,000 PSI
or Optional
Reach
75"
Number of Cylinders
4
Oil Tank
Optional
Bucket Rolldown Angle
40 degrees
Digging Depth, Bucket Level
6"
Recommended Tractor
25 to 50 HP
Hydraulic Requirement Min.
8 GPM
Approx. Cost of Parts
$600-$1,400
-
-
NOTICE: as CADplans cannot control the skills of the builder, or the end use of the machine, CADplans makes no warranty stated or implied and the builder must assume all liability for safe construction, safety features and operation of theCADDigger. CADplans is not responsible for typographical errors.
All CADLoader orders include the following:
Spiral bound plans, including written instructions, raw material requirements, purchased equipment specifications (generic and part numbers) and photos
Itemized lists to assist in the steel and hydraulics sourcing
